• Standard top pivot L180 included
• ML19 intermediate pivot required (order separately)
• Bottom pivot mortised into floor • Available for fire door assemblies up to three hours (ferrous material). Specify FL117. Intermediate pivot required by UL. Specify FML19 (order separately) Note: UL listing for 1-3/4" thick doors only
• Available to accommodate lead in door thicknesses 1-3/4" (44mm), 2" (51mm), 2-1/4" (57mm), 2-1/2" (64mm), or 3" (76mm) – specify when ordering
• Additional thrust bearing for greater load capacity
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) of door height warrants another intermediate pivot
• For 20-minute label suffix “–20” to the part number
• Non-ferrous base material for top pivot
• 3/4" (19mm) offset (measured from centerline of pivot to face of door)
• Door edges must be beveled in 1/8" in 2"
• Furnished with wood and machine screws
• Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard
• Doors will swing 180°, trim permitting